The 2 inch brass ball valve is mainly used in the pipeline to control and regulate the flow of medium, which is suitable for water, oil and non-flammable gas. The valve is connected with the pipe by thread connector. And the valve body is made of brass material.attachments such as flat surface cleaners, extension wands, and water brooms. These pressure washer ball valves are great time savers.
Read MoreSend InquiryGate Valve Parts are generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions. A gate valve consists of a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve. The seat and the gate together perform the function of shutting off the flow of fluid.
Read MoreSend InquiryPressure washer ball valve the user to temporarily stop the water flow through the pressure hose without shutting down the machine and change quickly between spray gun and other attachments such as flat surface cleaners, extension wands, and water brooms. These pressure washer ball valves are great time savers.
Read MoreSend InquiryA 4 inch ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. The ball has 4 inch(100 mm)nominal diameter. It is used in the pipeline to cut, distribute and change the flow direction of the medium. Ball valves feature small torque value, good sealing performance and easy operation.
Read MoreSend InquiryVertical check valve is a check valve similar to the lift check valve. However, this valve generally has a spring that will 'lift' when there is pressure on the upstream side of the valve. The pressure needed on the upstream side of the valve to overcome the spring tension is called the 'cracking pressure'. When the pressure going through the valve goes below the cracking pressure, the spring will close the valve to prevent back-flow in the process.
Read MoreSend Inquiry2 Inch Check Valve is a type of valve that allows liquids, gases, and steam to flow in only one direction. The diameter of the valve is 2 inch. A check valve can have a ‘stopping’ mechanism that can be shaped like a ball, disc, piston, or poppet. The valve is connected by thread and pipe.
Read MoreSend Inquiry