Products

View as

Triple Eccentric Butterfly Valve

1. The double flow direction can bear pressure to realize the installation mode without flow direction restriction. 2. The design of all metal seal, the seat and sealing ring adopt steli alloy surfacing technology to solve the problem of poor sealing performance of butterfly valve under severe working conditions such as high temperature, high pressure and low temperature. triple eccentric butterfly valve can withstand pressure up to 2500 pounds, and the temperature resistance is as low as -196 ℃ to 850 ℃, the seal reaches 0 leakage and the control ratio is up to 100:1. 3.The triple eccentric butterfly valve seat and valve body are designed separately, and the valve plate and sealing ring are designed separately. The products can be matched and interchanged. The whole valve will not b......

Read More Send Inquiry

Plunger Globe Valve

In plunger globe valves, valve clack and valve seat are designed by the plunger principle. The valve clack is polished into a plunger and connected to the valve stem. The sealing is achieved by two elastic seal ring that sheathed on the plunger. The two elastic seal ring are separated by a sleeve ring and the rings around the plunger are held tight by a load applied to the bonnet by the bonnet nut. Globe valves are mainly used for opening and closing flow.

Read More Send Inquiry

Composite Exhaust Valve

Composite exhaust valve is a barrel shaped valve body, which mainly contains a group of stainless steel balls, rods and plugs. Composite exhaust valve is installed at the pump water outlet or in the water supply and distribution pipeline to remove a large amount of air accumulated in the pipeline, or a small amount of air accumulated at a higher place of the pipeline is discharged into the atmosphere, so as to improve the service efficiency of the pipeline and the pump Valve quickly inhales outside air to protect the pipeline from damage caused by negative pressure.

Read More Send Inquiry

Pneumatic Atuated Butterfly Valve

The Pneumatic Atuated Butterfly Valve produced by MST Valve Company Ltd. is a centerline butterfly valve with good corrosion resistance and sealing performance. Pneumatic actuated butterfly valves are generally divided into flange type pneumatic actuated butterfly valves and wafer type pneumatic actuated butterfly valves. Pneumatic actuated

Read More Send Inquiry

Orbit Ball Valve

Orbit ball valves are suitable for petrochemical, liquefied petroleum gas storage, refineries, natural gas, compressor systems, oil and gas pipelines, light industry, textile and other industries. Ball valve in the pipeline is mainly used to cut off, distribution and change the flow direction of the medium.

Read More Send Inquiry

Quick Exhaust Valve

Quick exhaust valve is based on the buoyancy characteristics of water on stainless steel floating ball When the water level in valve rises, the floating ball will automatically float up under the buoyancy of water until it is connected with the sealing surface of the exhaust port. When the water level in valve decreases, the ball will drop with the water level. At this time, a large amount of air will be injected into the pipe through the exhaust port. After being installed on the pipe, the ball will automatically open / close the exhaust valve by using the inertia of water to the floating ball Air port.

Read More Send Inquiry

<...28 29 30 31 32...40 >